|
PHYSICAL CHARACTERISTICS : |
 |
|
| |
|
|
CONDUCTOR : |
| Number of Coax: |
1 |
| Total Number of Conductors: |
1 |
| Series Type: |
Series 6 |
| AWG: |
18 |
| Stranding: |
Solid |
| Conductor Diameter: |
.040 in. |
| Conductor Material: |
BCCS - Bare Copper Covered
Steel |
| |
|
|
INSULATION : |
| Insulation Material: |
Gas-injected FPE - Foam
Polyethylene |
| Insulation Diameter: |
.180 in. |
|
|
|
|
OUTER SHIELD : |
| Outer Shield Material
Trade Name: |
Duobond® II |
| Outer Shield Type: |
Tape/Braid |
| Outer Shield Material:
|
|
| Layer Number |
Trade Name |
Type |
Material |
% Coverage (%) |
| 1 |
Bonded Duofoil® |
Tape |
Bonded Aluminum Foil-Polyester Tape-Aluminum Foil |
100 |
| 2 |
|
Braid |
AL - Aluminum |
60 |
|
|
|
| Outer Shield %Coverage: |
100 % |
|
|
|
|
OUTER JACKET : |
| Outer Jacket
Material: |
PVC - Polyvinyl
Chloride |
|
|
|
|
OVERALL NOMINAL DIAMETER : |
| Overall Nominal
Diameter: |
.270 in. |
|
MECHANICAL
CHARACTERISTICS : |
|
|
| Operating
Temperature Range: |
-40°C To
+80°C |
| Bulk Cable
Weight: |
30
lbs/1000 ft. |
| Max.
Recommended Pulling Tension: |
126 lbs.
|
| Min. Bend
Radius (Install): |
3 in.
|
|
APPLICABLE
SPECIFICATIONS AND AGENCY COMPLIANCE : |
|
|
|
|
|
|
APPLICABLE STANDARDS : |
| NEC/(UL)
Specification: |
CATV,
CM |
| CEC/C(UL)
Specification: |
CM
|
|
|
|
|
FLAME TEST : |
| UL
Flame Test: |
UL1581 Vertical Tray |
|
|
|
|
PLENUM/NON-PLENUM : |
|
Plenum (Y/N): |
N |
|
Plenum Number: |
9116P |
|
ELECTRICAL CHARACTERISTICS : |
|
|
|
Nom. Characteristic Impedance: |
75 +/-3 Ω |
|
Nom. Inductance: |
.097 µH/ft |
|
Nom. Capacitance Conductor to
Shield: |
16.2 pF/ft |
|
Nominal Velocity of Propagation: |
83 % |
|
Nominal Delay: |
1.2 ns/ft |
|
Nom. Conductor DC Resistance @
20 Deg. C: |
28 Ω/1000 ft |
|
Nominal Outer Shield DC
Resistance @ 20°C: |
9 Ω/1000 ft |
|
Minimum Structural Return Loss:
|
|
|
Description |
Frequency (MHz) |
Start Frequency (MHz) |
Stop Frequency (MHz) |
Minimum Structural Return
Loss (dB) |
| |
|
5 |
1000 |
20 |
|
|
|
|
|
|
Description |
Frequency (MHz) |
Start Frequency (MHz) |
Stop Frequency (MHz) |
Max. Attenuation (dB/100
ft.) |
| |
5 |
|
|
0.67 |
| |
55 |
|
|
1.60 |
| |
211 |
|
|
2.87 |
| |
270 |
|
|
3.24 |
| |
300 |
|
|
3.43 |
| |
350 |
|
|
3.72 |
| |
400 |
|
|
4.00 |
| |
450 |
|
|
4.26 |
| |
550 |
|
|
4.71 |
| |
750 |
|
|
5.59 |
| |
870 |
|
|
6.00 |
| |
1000 |
|
|
6.54 |
|
|
|
|
Max. Operating Voltage - UL: |
350 V RMS |
|
NOTES : |
|
|
|
Notes: |
Sweep tested 5 MHz to 1 GHz.
|
|
PUT-UPS AND COLORS: |
|
|
|
Item |
Description |
Put-Up (ft.) |
Ship Weight (lbs.) |
Jacket Color |
Notes |
|
9116 0091000 |
#18 GIFHDLDPE SH PVC |
1000 |
32 |
WHITE |
|
|
9116 009500 |
#18 GIFHDLDPE SH PVC |
500 |
17.5 |
WHITE |
|
|
9116 009U1000 |
#18 GIFHDLDPE SH PVC |
U1000 |
31 |
WHITE |
|
|
9116 009U500 |
#18 GIFHDLDPE SH PVC |
U500 |
15.5 |
WHITE |
|
|
9116 0101000 |
#18 GIFHDLDPE SH PVC |
1000 |
32 |
BLACK |
C |
|
9116 010500 |
#18 GIFHDLDPE SH PVC |
500 |
17.5 |
BLACK |
|
|
9116 010S700 |
#18 GIFHDLDPE SH PVC |
S700 |
18.9 |
BLACK |
|
|
9116 010U1000 |
#18 GIFHDLDPE SH PVC |
U1000 |
31 |
BLACK |
|
|
9116 010U500 |
#18 GIFHDLDPE SH PVC |
U500 |
15.5 |
BLACK |
|
|
9116 290U1000 |
#18 GIFHDLDPE SH PVC |
U1000 |
31 |
BEIGE, LIGHT |
|
|
9116 Q5H1000 |
#18 GIFHDLDPE SH PVC |
1000 |
32 |
WHITE, NEUTRAL |
|
|
9116 Q5HU1000 |
#18 GIFHDLDPE SH PVC |
U1000 |
31 |
WHITE, NEUTRAL |
|
|
C = CRATE REEL PUT-UP. |
|
|
Revision Number: 1 Revision
Date: 02-02-2004 |
| |
| |
|
|
![]() |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2003 Belden Wire & Cable Company |
| |
All Rights Reserved. |
|
Although Belden Electronics Division
("Belden") makes every reasonable
effort to ensure their accuracy at
the time of this publication,
information and specifications
described herein are subject to
error or omission and to change
without notice, and the listing of
such information and specifications
does not ensure product
availability. |
| |
Belden provides the information and
specifications herein on an "AS IS"
basis, with no representations or
warranties, whether express,
statutory or implied. In no event
will Belden be liable for any
damages (including consequential,
indirect, incidental, special,
punitive, or exemplary damages)
whatsoever, even if Belden has been
advised of the possibility of such
damages, whether in an action under
contract, negligence or any other
theory, arising out of or in
connection with the use, or
inability to use, the information or
specifications described herein. |
|
All sales of Belden products are
subject to Belden's standard terms
and conditions of sale. |
|
|
|
|
|
|
|
|
|
|
